TennisCrown

Tennis Blog

How to Use Tennis Doubles Signals for Better Teamwork?

Updated 9 min read

A doubles point can turn on one quiet finger hidden behind a back. Your partner flashes a signal, the serve goes wide, the net player darts acrossโ€”and suddenly your opponents are scrambling to hit a passing shot they never wanted to hit. Or the signal is misunderstood, both teammates move the same way, and the middle of the court opens like a front door.

Thatโ€™s the thrill of doubles communication: tiny messages, big consequences. A clear system helps you coordinate poaches, serve locations, and return formations without a mid-point conversation. The trick isnโ€™t inventing a complicated code. Itโ€™s agreeing on a few simple signals, using them consistently, and talking through the plan before the ball is in play.

Start with the idea behind the signals

In most doubles teams, the net player gives a hand signal behind their back before the serve. The server sees it and either agrees to the plan or asks for a change. The message usually covers two things: where the serve is going and whether the net player plans to move across for a poach.

Thereโ€™s no universal code. One teamโ€™s signal for a poach might mean โ€œholdโ€ to another, so never assume your partner knows your system. Agree on the meanings together, then keep the signals easy to see and easy to remember.

Think of the signal as a plan, not a promise. If the serve lands somewhere unexpected or the returner makes a brilliant play, adjust. A good team follows the strategy; a smart team responds to the ball.

Build a simple serve-and-poach code

Begin with two questions: Where are we serving? And what is the net player doing after the serve? You can assign a signal to each answer, or use one signal for the serve location and another for the net playerโ€™s movement.

For example, a team might use fingers to call the serve location and a closed fist to indicate that the net player will stay. A separate signal could mean the net player will poach. Thatโ€™s only one possible code; the important thing is that both players know exactly what each sign means.

Signal categoryExample meaningWhat the team should confirm
Serve targetWide, body, or down the TWhich side of the court the target refers to
Net-player movementPoach, fake, or hold positionWhether a fake includes a recovery step back
Combination planServe wide, then poachWho covers the open alley if the return goes there

Make the serve target specific

โ€œServe wideโ€ can mean different things to different players. Does it mean near the singles sideline, or just away from the receiverโ€™s forehand? Choose a practical target, such as โ€œwide enough to stretch them, but with margin,โ€ and discuss it before the match. The signal points to a zone, not a spot you have to hit by a millimeter.

Also decide what you mean by โ€œbody.โ€ On the deuce side, a serve into the receiverโ€™s body may jam a right-handed playerโ€™s forehand. On the ad side, the same general target can create a different problem. Your plan should account for handedness, strengths, and the returnerโ€™s positionโ€”not just the court markings.

Poach with a plan for the space you leave

A poach is not simply a dramatic dash across the middle. Itโ€™s a coordinated move that makes the returner feel pressure and gives your team a coverage plan. If the net player crosses, the server usually shifts toward the open side. If the net player holds, both players need to be ready for the likely return direction.

That teamwork is what makes an aggressive net presence effective. The Bryan brothers became famous for their attacking doubles style, but the lesson for recreational teams isnโ€™t to copy any one secret signal. Itโ€™s to make movement look coordinated: the server commits to a target, the net player reads the return, and both partners understand who owns the next ball.

Use a โ€œstay,โ€ โ€œgo,โ€ and โ€œfakeโ€ system

Many teams get plenty of mileage from three net-player options:

  • Stay: Hold the normal position and react to the return.

  • Go: Cross aggressively to intercept the return.

  • Fake: Show movement to make the returner hesitate or change direction, then recover to cover the likely shot.

Before using a fake, agree on what it looks like. A tiny shoulder twitch and a full sprint across the court are not the same message. The server also needs to know whether to shift behind the move or stay balanced. If youโ€™re still learning the system, start with โ€œstayโ€ and โ€œgo.โ€ Add the fake once you can execute those calls without confusion.

Timing matters. The net player should give the signal where the server can see it, then get into a ready position. Donโ€™t keep flashing a signal as the server begins the motion. The aim is a calm, clear agreement before the pointโ€”not a last-second puzzle.

Between-point communication: quick, useful, and calm

Hand signals canโ€™t answer every question. Between points, use a short conversation to adjust your plan. Keep it practical: one observation, one decision, and a reminder about the next ball.

For example: โ€œTheyโ€™re driving the return crosscourt when I serve wide. Letโ€™s show poach, but hold unless itโ€™s short.โ€ That gives both players something specific to try. Compare it with โ€œWe need to do better,โ€ which may be true but doesnโ€™t tell anyone what to do.

Useful between-point topics include:

  • Which return the opponents keep favoring.

  • Whether a serve target is working or needs to change.

  • Who is covering the middle on a particular formation.

  • Whether to poach more, hold position, or use a fake.

  • A simple reset after an error: โ€œSame plan; trust the call.โ€

Keep your tone steady, especially after a missed poach or a return that gets past you. Blame turns the next point into a second argument. A calm โ€œI went earlyโ€”letโ€™s hold next timeโ€ gives your partner information and helps you move on.

Also be mindful of event rules and pace-of-play requirements. Between-point discussion should stay brief enough that youโ€™re ready to play when the next point begins. In some competitions, coaching and communication rules may differ, so check the regulations for your event rather than assuming every format works the same way.

Coordinate return formations, too

Communication matters just as much when youโ€™re returning. Before the server starts, decide whether your net player will use a standard position, shade toward the middle, or show an unusual look. The returner should know what that movement means and which area they are expected to cover.

A simple return plan might sound like this: โ€œIโ€™ll return crosscourt; you stay near the middle unless you see a weak second serve.โ€ That sets a default and leaves room to attack. If youโ€™re planning to poach the return yourself, tell your partner so they donโ€™t also move into the same space.

Teams can also agree on a specific formation for a particular point. For example, the net player might start closer to the alley to suggest a standard look, then shift toward the center before the serve. Or the pair might use an I-formation, with the net player near the center service line and a pre-agreed direction for the serve. These setups can disrupt a serverโ€™s rhythm, but they need a clear plan for who covers each side.

Return situationPossible planKey coverage question
Strong first serveUse a predictable return target and protect the middleWho takes a ball hit directly between you?
Second serve you can attackReturn aggressively while the net player looks for a poachWho covers the line if the net player crosses?
Opponent uses a sharp angleReturn crosscourt with enough height and marginHow far should the net player shade toward the center?

Donโ€™t change formations just to look clever. Use them to solve a problem: a server targeting one player, a returner who reads your usual pattern, or opponents who leave a predictable gap. If the new formation creates more confusion for you than for them, go back to your reliable setup.

Common communication mistakesโ€”and easy fixes

Changing the code without telling your partner

If you want a new signal, explain it before the next point. A sign that suddenly means something different is worse than no sign at all. Keep the code consistent through a match unless both players clearly agree to change it.

Poaching without server support

The net player canโ€™t cover every possible return. If you plan to cross, the server needs to know and shift accordingly. Talk through the uncovered alley before you use the signal in a tight moment.

Using too many signals

A sprawling code can sound impressive in practice and disappear under match pressure. Start with a few clear options. Add complexity only when both players can explain the system quickly and execute it reliably.

Sending mixed messages

Donโ€™t flash โ€œpoachโ€ and then stand frozen, or signal โ€œstayโ€ while drifting into the middle. Your movement should match your message. If you change your mind because of the toss or the return, react naturally and tell your partner what happened afterward.

A quick practice routine for doubles teams

You donโ€™t need a special drill to build better communication. Set aside ten minutes in a practice session and make the signals part of the point:

  • Agree on a small signal set and rehearse what each sign means.

  • Play several serve-and-volley points with the net player calling โ€œstayโ€ or โ€œgoโ€ silently.

  • After each point, take a few seconds to say whether the plan worked and what youโ€™ll change.

  • Switch serving sides and roles so both players understand the coverage.

  • Finish with a short set and keep the same system under pressure.

The goal isnโ€™t to poach on every possible ball. Itโ€™s to make your opponents respect the possibility. If they see a net player who sometimes holds, sometimes crosses, and communicates clearly with the server, they have to keep solving a fresh problem.

Frequently Asked Questions

What hand signals should a doubles team use?

Thereโ€™s no universal code. Choose simple signs for serve location and the net playerโ€™s planโ€”such as stay, poach, or fakeโ€”and agree on exactly what each one means. Keep the code small enough to remember under pressure.

Should the server always follow the net playerโ€™s signal?

No. The signal is a proposal for a coordinated play. The server should agree to it only if the target and movement feel comfortable. If not, discuss a change before starting the point.

When should we talk between points?

Use the time to share one useful observation and decide on the next adjustment. Keep it brief, constructive, and within your competitionโ€™s rules and pace-of-play expectations.

How do we stop leaving the alley open when we poach?

Agree before the serve on who shifts into the space the net player leaves. Then practice the move together: the poacher crosses, the server adjusts, and both players prepare for the next shot.

Final Thoughts

Good doubles communication isnโ€™t a secret code or a nonstop stream of instructions. Itโ€™s a clear plan your partner can trust: a serve target, a net-player decision, and a quick adjustment when the opponents show you something new. Keep the signals simple, talk with purpose between points, and back each other up when the plan doesnโ€™t go perfectly. Once you do, those little gestures behind the back start carrying a lot more weightโ€”and a lot more confidence.

Author

  • Jake Rowland

    Jake Rowland is a tennis analyst and lifelong fan of the sport. From Grand Slam showdowns to rising stars on the ATP and WTA tours, Jake helps readers understand match strategy and follow the sport with a critical eye. His work combines clear analysis with a deep passion for the game.

Leave a Comment