TennisCrown

Reviews

Best String Tension Meters Compared: Tracking Loss and Calibration

Updated 10 min read

Disclosure: As an Amazon Associate I earn from qualifying purchases. Learn more

A string tension meter can help you track how much tension your racket strings lose with play, while a calibrator can help check whether a stringing machine is pulling the tension you set. Those are related tools, but they do different jobs. Our picks include both types, so check the intended use before choosing. For tracking tension changes in a strung racket, the Tourna and GAMMA meters are the most straightforward options in this group.

Quick Comparison

ProductBest forKey detail
Tourna String Meter String Tension TesterTracking tension loss in racket stringsMeasures in pounds or kilograms and also measures string gauge
GAMMA Sports Racquet String Tension TesterOne-handed checks across several racket sportsMeasures relative tension loss over time
Anu Limen Badminton Racket String Tension TesterManual checks on badminton racketsDial gauge with an LBS scale; listing is marked unavailable
ZAWELIYO Racquet Tension CalibratorChecking a stringing machineโ€™s pull tensionSpring calibrator rated up to 100 pounds; listing is marked unavailable
Generic Tennis String Tension Meter CalibratorBasic machine calibrationSpring-style calibrator described for use up to 100 pounds

Our Picks: Best String Tension Meters reviews

Tourna String Meter: A Practical Pick for Tracking Tension Loss

The Tourna String Meter is designed to help you check the condition of strings already installed in a racket. Its instructions call for placing the pins where strings cross, twisting the tool until it lines up with a main string, and noting the reading. You can repeat the measurement across several main strings and compare readings over time.

The meter displays readings in pounds or kilograms and also measures string gauge. Its main value is tracking change: take a baseline reading, then check again after play to see whether tension has dropped. Treat the readings as a comparison tool rather than a substitute for the tension setting used when the racket was strung.

This is the clearest fit for players who want to monitor tension loss or compare the consistency of string jobs. It is more directly suited to that task than the spring calibrators below, which are intended to check a stringing machine. The supplied details do not specify a measurement accuracy range, so avoid relying on it for precision machine calibration.

Pros:

  • Designed to measure tension changes in installed strings
  • Shows readings in pounds or kilograms
  • Also measures string gauge
  • Can be used across multiple main strings for comparison

Cons:

  • Requires consistent placement and technique for useful comparisons
  • Not described as a stringing-machine calibrator

Verdict: Choose the Tourna if your main goal is to keep tabs on tension loss in a strung racket and compare readings over time.

GAMMA Sports Tester: A Simple One-Handed Tension Check

The GAMMA Sports Racquet String Tension Tester is made to measure relative tension loss as racket strings age. Its stated one-handed operation gives it a simple approach: check the racket, record the result, and repeat later to see how the reading changes.

The product is listed for tennis, squash, and racquetball, which makes it a versatile choice if you maintain more than one type of racket. Its focus is on relative change, not confirming the exact tension that a stringing machine applied. The supplied description does not provide a measurement scale or accuracy range, so it is best used for consistent comparisons rather than exact readings.

Compared with the Tourna, the GAMMA description emphasizes ease of handling and use across racket sports, while the Tourna explicitly lists pounds, kilograms, and string-gauge measurement. If those specific measurements matter to you, the Tourna has the more detailed stated feature set.

Pros:

  • Designed to track relative tension loss over time
  • Described as easy to operate with one hand
  • Listed for tennis, squash, and racquetball rackets

Cons:

  • No measurement units or accuracy range are stated in the supplied details
  • Not intended to check a stringing machineโ€™s calibration

Verdict: The GAMMA is a sensible option if you want a simple, one-handed way to compare tension changes across compatible rackets.

Anu Limen Badminton Tester: A Dial-Style Option for Badminton

This manual tester is described specifically for badminton rackets. It has a round dial with a visible pointer and an LBS scale, along with a central adjustment part for taking a hands-on reading. The stated body size is compact enough to store in a training bag or keep at a stringing station.

The dial format may suit players who prefer a visible pointer over a less familiar readout. As with any manual meter, repeatable results depend on following the same measuring method each time. The supplied details do not provide a stated accuracy range, so use readings mainly to compare changes rather than as a guarantee of exact string tension.

This pick is less broadly described than the Tourna and GAMMA, which are positioned for general racket-string checks. It may be worth considering if you want a badminton-focused tool, but the supplied listing data marks it unavailable. Check the product page before planning a purchase.

Pros:

  • Designed for badminton racket checks
  • Has a visible dial and LBS scale
  • Compact dimensions are provided for storage planning

Cons:

  • Listing is marked unavailable in the supplied product data
  • No accuracy range is stated

Verdict: Consider the Anu Limen if you specifically want a dial-style badminton tester, but confirm that it is available and suitable for your racket before buying.

ZAWELIYO Calibrator: A Machine-Check Tool, Not a String-Bed Meter

The ZAWELIYO is described as a spring tension calibrator for checking the accuracy of a racket stringing machine. It is intended to help verify the machineโ€™s pull tension, rather than measure tension loss in strings that are already on a racket. That distinction matters: it serves stringers checking equipment, not players monitoring an older string bed.

The listing describes an aluminum-alloy body and a capacity up to 100 pounds. It also says the tool is suitable for tennis, badminton, squash, and racket use. Those details suggest broad sport compatibility, but the supplied information does not state a calibration procedure or accuracy tolerance. Check that its design fits your machine and your calibration needs before relying on it.

Compared with the Tourna and GAMMA, this product addresses a different point in racket care: machine setup rather than string condition after play. The supplied listing data marks it unavailable, so verify the current listing status before considering it.

Pros:

  • Designed to check stringing-machine accuracy
  • Described for use up to 100 pounds
  • Listing specifies an aluminum-alloy construction
  • Described for several racket sports

Cons:

  • Does not serve the same purpose as a meter for installed strings
  • Listing is marked unavailable and no accuracy tolerance is stated

Verdict: This may suit a stringer who needs a spring calibrator, but it is not the right choice if you only want to track tension loss in a racket.

Generic Spring Calibrator: A Basic Choice for Stringing Setups

This generic product is presented as a spring-style calibrator for checking a stringing setup, with a stated capacity of up to 100 pounds. Its description says it is meant to help verify a stringing machineโ€™s tension, making it more relevant to people who string rackets than to players checking tension loss during regular use.

The product information is difficult to interpret in places and does not give a clear accuracy tolerance, calibration method, or specific material details. Those gaps make it harder to judge how it compares with a more fully specified calibrator. Before buying, confirm that the listing explains how to use it with your machine and that the capacity matches your intended tension range.

Unlike the Tourna or GAMMA, this is not described as a tool for measuring the tension of strings already installed in a racket. It is listed as available in the supplied product data, but that does not replace checking the product page for current details.

Pros:

  • Described as a spring calibrator for stringing setups
  • Stated capacity is up to 100 pounds
  • Listed as available in the supplied product data

Cons:

  • Product details are unclear and do not state an accuracy tolerance
  • Not described as a meter for monitoring tension loss in a strung racket

Verdict: Consider this generic calibrator only if machine calibration is your goal and you can confirm its operation and specifications with the seller.

How to Choose a String Tension Meter

Decide whether you need a meter or a calibrator

A racket-string meter checks strings that are already installed and can help you compare tension changes as you play. A machine calibrator checks whether a stringing machine is pulling as intended. The two tools are not interchangeable. If you want to know when your racket may need restringing, look for a tool designed to measure installed strings. If you string rackets yourself, a calibrator may be more useful for checking your equipment.

Check the measurement style and units

Look for a scale you can read and use consistently. The Tourna lists readings in pounds or kilograms, while the GAMMA is described as measuring relative tension loss without a unit listed in the supplied details. A dial gauge, such as the Anu Limen, may be easier to interpret if you prefer a pointer and printed scale. For any tool, understand whether the number is an absolute tension reading or mainly useful for comparing changes.

Match the tool to your racket sport

Some tools are described for multiple racket sports, while others are more specific. The Anu Limen is presented for badminton, and the GAMMA is listed for tennis, squash, and racquetball. If you play more than one sport, check the product details for compatibility rather than assuming that every meter works the same way across different racket types.

Look for repeatable measurement instructions

A tension reading is most useful when you can repeat the same method. Follow the toolโ€™s instructions, take readings from consistent areas of the string bed, and compare measurements under similar conditions. The Tourna specifically describes checking across multiple main strings. Do not treat a small difference between readings as proof of a problem unless you know the toolโ€™s accuracy and how much variation to expect.

Consider the information the listing does not provide

Accuracy range, calibration steps, and compatibility details can make a major difference, especially for a machine calibrator. When those details are missing, ask the seller or consult the manufacturerโ€™s instructions before relying on the tool for precise setup. Also check product availability, since some listings in this selection are marked unavailable in the supplied data.

Frequently Asked Questions

What does a string tension meter measure?

A string tension meter checks the condition or tension of strings in a racket. Depending on the model, it may provide a reading or help you compare changes over time. A machine calibrator serves a different purpose: it checks the tension pull of a stringing machine.

Can a string meter tell me exactly when to restring?

It can help you track tension loss, but it cannot make the decision for you. Consider your playing feel, string condition, and how your racket performs along with repeated meter readings. Use the same measuring method each time for the most useful comparison.

Are a tension meter and a stringing-machine calibrator the same thing?

No. A meter for installed strings checks a racketโ€™s string bed. A calibrator is used to check the stringing machineโ€™s tension pull. Choose based on whether you want to monitor a racket after stringing or check the machine used to string it.

How should I compare readings over time?

Start with a baseline reading, then repeat the measurement using the same tool, placement, and technique. Checking several consistent points can help you spot a trend. Avoid comparing readings taken with different tools as if they were directly equivalent.

Which pick is best for badminton?

The Anu Limen is specifically described as a badminton racket tester and has an LBS dial. However, its listing is marked unavailable in the supplied product data. The ZAWELIYO is described as a multi-sport machine calibrator, so it is for checking stringing equipment rather than tracking tension loss on an already-strung racket.

Do string tension meters measure string gauge too?

The Tourna description specifically says it measures string gauge as well as tension in pounds or kilograms. The supplied details for the other string-bed testers do not make the same claim, so check their product information if gauge measurement is important to you.

Final Recommendation

For most players who want to monitor tension loss in a racket, the Tourna String Meter is the most clearly specified choice in this group: it describes a repeatable checking method, lists pounds and kilograms, and also measures string gauge. The GAMMA is another straightforward option if one-handed use and compatibility with several racket sports matter more to you. Choose a spring calibrator only if you need to check a stringing machine, and confirm its specifications before relying on it for precise calibration.

Author

  • Jake Rowland

    Jake Rowland is a tennis analyst and lifelong fan of the sport. From Grand Slam showdowns to rising stars on the ATP and WTA tours, Jake helps readers understand match strategy and follow the sport with a critical eye. His work combines clear analysis with a deep passion for the game.

Leave a Comment