Disclosure: As an Amazon Associate I earn from qualifying purchases. Learn more
The best stringing machine accessories solve specific problems: checking tension accuracy, holding short strings, protecting equipment, or improving clamp performance. The right choice depends on your machine and the work you do. This guide compares five options, with a key compatibility note: the Tourna digital calibrator is designed for constant-pull machines, not lock-out machines or manual tensioners.
Quick Comparison
| Product | Best For | Key Consideration |
|---|---|---|
| Tourna Tension Calibrator | Checking tension on a constant-pull machine | Not compatible with lock-out machines or manual tensioners |
| GAMMA Starting Clamp | Starting string jobs and gripping short strings | Holds tension up to 95 pounds |
| GAMMA Stringing Machine Cover | Protecting a machine from dust and debris | Availability is listed as unavailable in the supplied product information |
| Daspom Stringing Machine Cover | Covering compatible upright machines | Measure your machine; listed dimensions are 40 ร 18 ร 18 inches |
| Tourna Universal CNC Precision Clamp | Replacing or upgrading a Tourna machine clamp | Designed to fit Tourna stringing machines; availability is listed as unavailable in the supplied product information |
Our Picks: Best Stringing Machine Accessories reviews
Tourna Tension Calibrator: Best for Checking Machine Accuracy
A stringing machine can display a tension setting without that number matching the force it actually pulls. This digital calibrator is made to help you check the difference. Attach it to a machine clamp, pull tension, and compare its reading with the machineโs setting.
The display switches between pounds and kilograms, and the calibrator comes with string attached to make setup more direct. Its most important limitation is machine type: the product is intended for constant-pull machines and is not compatible with lock-out machines, cranks, or manual tensioners.
This is a useful maintenance tool for stringers who want to verify tension rather than assume the machine remains calibrated. It is not a general-purpose add-on, though, so confirm your machine uses constant pull before choosing it. Unlike the clamp and cover options below, it does not help hold or protect the racquet; its job is measurement.
Pros:
- Digital readout switches between pounds and kilograms
- Helps compare machine settings with measured tension
- Comes with string attached for setup
- Purpose-built for checking constant-pull machines
Cons:
- Not compatible with lock-out machines or manual tensioners
- Useful only for checking tension, not for holding or protecting equipment
Verdict: Choose the Tourna calibrator if you use a compatible constant-pull machine and want a direct way to check its tension accuracy.
GAMMA Starting Clamp: A Versatile Grip for Stringing Tasks
A starting clamp gives you an extra way to grip string during a job. GAMMAโs model uses a heavy-duty spring to hold string in place and can also help apply tension when a string is too short to reach the machineโs tension head easily.
The clamp is described as compatible with any string and able to hold tension up to 95 pounds. It is intended for tennis and badminton stringing, which makes it a flexible addition if you work on both types of racquets. As with any clamp, the useful amount of grip depends on placing it securely and using it for the task it was designed to handle.
Compared with the Tourna calibrator, this is a hands-on tool for managing string rather than checking a machineโs pull. It may suit technicians who want a backup grip or who regularly handle short strings. If you only string occasionally and have no need for an extra clamp, it may be less important than a tool that solves a recurring issue in your setup.
Pros:
- Heavy-duty spring provides a firm grip
- Can serve as an extra starting clamp
- Can help apply tension to short strings
- Designed for tennis and badminton stringing
Cons:
- Does not measure or calibrate machine tension
- Its usefulness depends on whether you need an additional grip
Verdict: Pick the GAMMA starting clamp if you need a versatile extra grip for starting jobs or handling short strings.
GAMMA Stringing Machine Cover: Simple Dust Protection
This cover is designed to shield a stringing machine from dust and debris between jobs. Its heavy-duty denier nylon construction is intended to handle regular use, while the fitted design aims to cover the equipment without slipping. The lightweight material is also described as easy to put on and remove.
A cover is a practical choice if your machine sits out in a home workspace or shop and you want to reduce its exposure to dust. It does not add stringing functions or improve machine accuracy, but it may help keep the equipment cleaner when it is not in use. The product information does not provide dimensions, so check the listing and compare the fit with your machine before ordering.
The supplied product information lists this cover as unavailable. That makes it harder to plan around than the other protective option in this guide. If you are considering it, verify that the listing is available and that its fit suits your machine before making a decision.
Pros:
- Heavy-duty nylon construction
- Designed to reduce exposure to dust and debris
- Lightweight material is intended for easy on-and-off use
- Fitted design aims to stay in place over the machine
Cons:
- Availability is listed as unavailable in the supplied product information
- Product information does not specify cover dimensions
Verdict: Consider this GAMMA cover if you find it available and can confirm that its fitted design works with your machine.
Daspom Waterproof Cover: A Measured Fit for Upright Machines
Daspomโs cover is made from 600D Oxford fabric with an inner waterproof coating. It is listed at 40 inches long, 18 inches wide, and 18 inches high, so measuring your machine is essential before ordering. The product description names several compatible models, including ST, ST II, X-ST, X-ELS, Progression ELS, 7000Es, 6002Es, 6002, 6004, 5003, and 5002.
The cover uses an elastic hem or drawstring closure, with a reinforced strap intended to help keep it secure. A top handle is provided for removal, and an included storage bag is intended for folding the cover away when it is not in use. These details make it a more feature-rich option for someone who wants protection from dust and humid conditions.
Compared with the GAMMA cover, this option provides stated dimensions and more detail about its closure and storage. That does not guarantee a fit on every machine, so use the measurements rather than relying only on the model list. The supplied product information lists it as unavailable, so check the listing before planning to buy it.
Pros:
- 600D Oxford fabric with an inner waterproof coating
- Listed dimensions make it easier to compare against your machine
- Elastic hem or drawstring and reinforced strap help secure the cover
- Includes a top handle and storage bag
Cons:
- Availability is listed as unavailable in the supplied product information
- Requires careful measuring to confirm fit
Verdict: Choose the Daspom cover if its dimensions match your machine and you want a more detailed fit and storage setup; first confirm that it is available.
Tourna CNC Precision Clamp: A Machine-Specific Clamp Upgrade
This clamp is made for Tourna stringing machines. It is CNC-crafted from aluminum alloy and has a sandblasted surface intended to add friction against the string. The product description says this design allows the clamp to hold string with less pressure, which may help limit deformation from clamping.
The clamp also has uniform gaps between its teeth and a dial plate design intended to prevent loosening during or between string jobs. Its post diameter is listed as 12 millimeters. These details matter when replacing a clamp: a clamp needs to fit the machineโs mounting system as well as hold string properly.
Unlike the GAMMA starting clamp, this is a machine clamp rather than an extra hand-held grip. Its stated fit is limited to Tourna stringing machines, so do not assume it will work with another brand. The supplied product information lists it as unavailable, another reason to verify the listing before choosing it as a replacement part.
Pros:
- CNC-crafted aluminum alloy construction
- Sandblasted surface is designed to add string grip
- Uniform tooth spacing and a dial plate design aim to support consistent clamping
- 12-millimeter post diameter is specified
Cons:
- Designed to fit Tourna stringing machines, not stated as a universal cross-brand fit
- Availability is listed as unavailable in the supplied product information
Verdict: Consider this clamp as a replacement or upgrade for a compatible Tourna machine, but confirm the fit and listing availability first.
How to Choose Stringing Machine Accessories
Start with the job you need the accessory to do
These products serve different purposes, so start by naming the problem you want to solve. A calibrator checks whether tension matches the machine setting. A starting clamp helps grip string. A replacement machine clamp holds string on the machine, while a cover protects equipment when it is not in use. Buying for a specific need is more useful than choosing an accessory simply because it looks versatile.
Check machine compatibility before ordering
Compatibility can be a hard limit. The Tourna calibrator is for constant-pull machines and is not intended for lock-out machines, cranks, or manual tensioners. The Tourna precision clamp is described as fitting Tourna machines. For a cover, compare the productโs dimensions with your machine and check any listed model names. Do not treat a product described as universal for one brand as universal across brands.
Match a clamp to the way you string
A starting clamp and a machine clamp are not interchangeable. A starting clamp is an extra grip that can help secure string or work with a short section. A machine clamp is part of the machineโs clamping setup and must fit its post or mounting system. Consider which task you need help with, and confirm that the clampโs intended use matches your setup.
Choose a cover based on fit and storage conditions
Measure the machine before choosing a cover, including the parts the cover needs to go around. A close fit can help a cover stay in place, while an oversized or undersized cover may not provide the protection you want. If moisture protection matters, check the material details. The Daspom cover lists a waterproof coating, while the GAMMA cover is described as protection from dust and debris.
Consider maintenance and availability
A calibrator is useful only if you can use it with your machine, and a replacement clamp is useful only if it fits. Check the listing for current availability and any machine-specific details before purchasing. For tools that affect string tension or clamping, follow the product instructions and your machineโs guidance rather than forcing a fit.
Frequently Asked Questions
Which accessory is most useful for checking stringing tension?
The Tourna Tension Calibrator is designed to compare a constant-pull machineโs displayed setting with a digital reading. It is not compatible with lock-out machines, cranks, or manual tensioners.
Can I use the Tourna calibrator with a lock-out machine?
No. The product information specifically excludes lock-out machines, cranks, and manual tensioners. Check the type of tension system your machine uses before buying.
What is the difference between a starting clamp and a machine clamp?
A starting clamp is an extra grip that can hold string or help with short strings. A machine clamp is mounted as part of the stringing machineโs clamping system. The Tourna CNC clamp is described as fitting Tourna machines, while the GAMMA starting clamp is presented as a separate, versatile grip.
Will the Daspom cover fit any stringing machine?
It is not described as fitting every machine. Its listed dimensions are 40 ร 18 ร 18 inches, and the product information names several models. Measure your equipment and compare it with those dimensions before ordering.
Are the two covers waterproof?
The Daspom cover is described as 600D Oxford fabric with an inner waterproof coating. The GAMMA cover is described as a heavy-duty nylon cover that helps protect against dust and debris; the supplied product information does not describe it as waterproof.
Can a starting clamp be used for both tennis and badminton stringing?
The GAMMA starting clamp is described for use with tennis and badminton stringing machines. Check that its grip and intended use suit the strings and tasks in your setup.
Final Recommendation
For tension checks, the Tourna digital calibrator is the clearest choice if you have a compatible constant-pull machine. For hands-on string handling, the GAMMA starting clamp offers a different kind of value by helping grip string and manage short sections. If equipment protection is your priority, compare cover dimensions and materials carefully, and confirm availability before ordering. For a replacement machine clamp, verify brand and post compatibility first. The best accessory is the one that addresses your actual stringing need and fits your machine.
